User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function DPO 2-83
2.11.5.1 TFRM, Tabular Format
Example of a TFRM Tabular Format Listing
T8 12:24:10 Function=PNT : DPO
Operation=LI : LI
Display Format=TFRM : ?
0 TFRM = List Data in Tabular Format
1 LFRM = List Data in Long Format
Display Format=TFRM : TFRM
1. Series
---------
Address=. : $100'041
# Address Flag PAR TYP INT ORG from upto
-----------------------------------------------------------------
1 $d100'041 INST I60m CIRC 20.06.1996 28 Day
$d100'041 RDO 12:00 >>o.k.!
2. Series
---------
Address=. :
No "Address mask" can be entered for a TFRM. tabular format. All prompts must be
correctly answered during the dialogue, otherwise prompts may be repeated
continuously. It is therefore useful to check the DP Value Log type involved with DIR
directory before making a LI listing.
The term 'Series' refers to a column of listed values from an individual DP Value Log
(see Function DPO,GEN).
In a tabular listing (TFRM) it is possible to print a maximum of 5 different series of
instantaneous values next to each other. If only one or two series of values are required,
a full stop (".") is entered as response to the prompt for the succeeding 2nd or 3rd
Series "Address=:" respectively.
In listings containing up to three series columns, 'Validity Markers' are included (see
section on 'Validity Marker'). If there are more than three series columns only the logged
values are listed.
An extended Mean/Min/Max value (MMM) can only be listed singly in the form of three
series columns.
Series
Max. 5 instantaneous
value series
Displaying the validity
marker
Displaying MMM