User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
1-6 Quick Guide - Address entries Landis & Staefa Division
If you want to include all existing data points of the DCS, enter the following:
$*
If you want to include all data points of process station
52
from address range
020 to
030
, enter the following:
$52’020..$52’030
IF you want to include all data points of process station
52
, beginning at point
010
to
process station
54
, ending at point
030,
enter the following:
$52’010..$54’030
Specify a filter function for the following entry (three periods ‘...’ for range), but only for
data points
010
to
030
of each process station. (the points
001
to
007
and from
030
are dropped):
$52’010...$54’027
1.3.2 User addresses
Each data point can be assigned a user address. In an optimum structure, a user
address contains a unique description of the associated information data point - for
example location, plant type, plant number, function, etc.
The DCS dialogue shows the previously defined user address structure that is expected
for address entry:
Address=$52’030 : ?
User Address range = *'**'****"*****
UA : A'AA'AAAA"ddddd
TA : $eee'mop, $Rn, $S, $Tn; eee=d32, o40; mop=070, M29p1, VIP8, PS, ...
+ : Next UA/TA
- : Previous UA/TA
Address=52’030 :
User addresses consist of any combination of digits, letters, delimiters (#), and dummy
delimiters ("), max. 26 characters; e.g.:
a'bb'cccc"ddddd
a
Building (e.g.)
'
Delimiter for optical and structural subdivision of the respective address
bb
. Floor (e.g.)
‘ Delimiter
cccc
‘Plant type, plant number (e.g.)
"
A dummy delimiter to separate the redundant dummy address extension
ddddd
Any descriptive text
In order to select data point '08' in building ‘C’, floor ‘03’, ‘ventilation plant’, thus
C03Lu08
, enter the following user address:
c'03'lu08
Enter the address range of user addresses as follows:
b'00'he01..e'03'lu35
How to enter an address
range
Note
How to enter a user
address
How to enter an address
range