User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-122 Funktion ... Landis & Staefa Division
2.12.12 Output Terminal Configuration
The terminal involved must have full graphics capability. This covers printers, video
terminals or PCs with 'Terminal emulation'.
In VISONIK Teletype Point $Tn ('n' = terminal number) the following parameters are
most important:
TYX / Extra Options
DTYP / Device Type
LPP / Lines per Page
VPIT / Lines per Inch
GRMO / Graphic Mode
Parameters TYX, DTYP, LPP and VPIT
If the terminal can be declared as intelligent ($Tn, TYX=XoXf&ITER) parameter $Tn,
DTYP is set automatically.
The colour option must be activated with TYX+=COL.
If the terminal C A N N O T be declared as intelligent ($Tn, TYX=XoXf) parameter $Tn,
DTYP must be manually set accordingly.
Parameters LPP and VPIT must be properly set to give correct page formats.
Various terminals (e.g. VISUAL 603, VT240, etc.) support several graphic modes. It is
therefore necessary to specify precisely the mode for output of graphs.
This is defined in point parameter $Tn, GRMO (Graphic Mode).
GRMO=SIXEL,R4,R16,T401x,E8 and E24.
TYX
DTYP
LPP and VPIT
Parameter GRMO
DPP supports the graphic
modes: