User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-134 Function DRR Landis & Staefa Division
2.13.4 DEL, Delete Register Entry(ies)
The DEL operation can be used to selectively delete reaction entries. The entries to be
deleted can be filtered according to the following criteria:
•
by start date
•
by entry numbers
•
by reactions
If the reaction type CT, MC or CB is entered at the prompt "Reaction=?:", the user can
make a finer selection according to text or task number.
T8 14:03:53 Function=PNT : DRR
Operation =CH : DEL
Start Date =* :
Entry =* :
Reaction =.. : ..
Accept Every Entry=Yes : Yes
14.08.1996 / 1 14:02 to 15.08.1996 - 23:59
Period 3 Hour
Next DRR 14.08.1996 - 17:02
Blocking Flag BL'OC'KING"01
Off
?FL_____DRR Blocked!________(BL'OC'KING"01.RFL=Step 1)
Reaction PACH_Change Point Parameter
Address DO $d100'041
Parameter DO___Set Digital Output: Priority=0
Value 0=Off
Reporting MSGDEV M1
Delete =No : Yes
* * E N T R Y E R A S E D * * >>o.k.!
It is recommended that the option
"Accept Every Entry =YES"
should be set. With this setting each reaction entry to be deleted is listed completely at
the operator terminal, and the user must acknowledge the deletion of each one
manually in order to prevent inadvertent deletion.
If the option is not set, the VISONIK DCS automatically deletes all specified entries. The
entries to be deleted are listed with their "reasons" and entry numbers at the operator
terminal. The automatic deletion procedure can be aborted with Ctrl/P or Ctrl/E, if
necessary.
2.13.5 LSTA, List Reaction Register State
This provides an overview of all Reaction Registers.
Recommendation: