User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-158 Function GRR Landis & Staefa Division
Example for ?FL
$d100'000...$d100'377 / 7
MSGP 1 (=Message Priority)
Edge 1
Blocking Flag BL'OC'KING"01
Off
?FL_____GRR Blocked!________(BL'OC'KING"01.RFL=Step 1)
Reaction PACH_Change Point Parameter
Address DO $d100'041
Parameter DO___Set Digital Output: Priority=0
Value 0=Off
Reporting MSGDEV M1
2.16.4 DEL, Delete Register Entry(ies)
The DEL operation can be used to selectively delete reaction entries. The entries to be
deleted can be filtered according to the following criteria:
•
by address mask"
•
by entry numbers
•
by reactions
If the reaction type CT, MC or CB is entered at the prompt "Reaction=?:", the user can
make a finer selection according to text or task number.
T8 08:25:12 Function=PNT : GRR
Operation =CH : DEL
Address Mask =* : $100*
Entry =* : *
Reaction =.. : $100'041
Accept Every Entry=Yes : Yes
$d100'040 / 4
Edge 0&1
Blocking Flag BL'OC'KING"01
Off
Reaction PACH___Change Point Parameter
Address DO $d100'041
Parameter DO_____Set Digital Output: Priority=0
Value 0=Off
Reporting MSGDEV M1
Delete =No : Yes
* * E N T R Y E R A S E D * * >>o.k.!
It is recommended that the option
"Accept Every Entry =YES"
should be set. With this setting each reaction entry to be deleted is listed completely at
the operator terminal, and the user must acknowledge the deletion of each one
manually in order to prevent inadvertent deletion.
If the option is not set, the VISONIK DCS automatically deletes all specified entries. The
entries to be deleted are listed with their "reasons" and entry numbers at the operator
terminal. The automatic deletion procedure can be aborted with Ctrl/P or Ctrl/E, if
necessary.
Recommendation: