Manualshelf

User Manual

ManualsBrandsSiemens ManualsBuilding automationMounting and Installations Handbook Building Process Station, BPS P-Bus, I/O Module System
181182183184185186187188189190
Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function KER 2-163
2.17.4 Terminate Transparent Mode with VISONIK DCS
After starting KERMIT in VISONIK DCS, transparent mode must be terminated from the
PC. This means that further action to transfer EKP files is carried out from the PC.
Re-entry into KERMIT operation at the PC is by simultaneously pressing "Ctrl" "]"
followed by "Ctrl C".
This is acknowledged by the PC "KERMIT" prompt:
Kermit-MS>_
2.17.5 Stop KERMIT Programs
After finishing a file transfer, either further files may be transferred or the KERMIT
programs stopped.
Instruction "BYE" through PC "KERMIT" stops both it own and VISONIK DCS "KERMIT"
programs.
Kermit-MS>BYE
The PC returns to its Operating System.
Instruction "EXIT" does not stop the VISONIK DCS "KERMIT" program, so "BYE" must
always be used.
Note