User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-166 Function KEY Landis & Staefa Division
Following this, the listing continues showing those functions to which the user (John
Brown) has access. These levels are numbers placed in front of the relative abbreviated
Function's name. The left and right hand numbers refer to the "read/write" levels
respectively.
To each entry in the "KEY" register (see operation LI), VISONIK DCS automatically adds
the following data:
–
The terminals at which the user is logged in.
–
Date of entry
–
The second last/last date of access to the system.
2.1.1 "KEY" Function Entry and Handling
CTRL/P KEY
VISONIK DCS offers the following possibilities (Operations) for handling access rights in
the "KEY" register:
ctrl/P
T4 00:13:40 Function =PNT : KEY
Operation =CH : ?
0 CH = Change Data Entry
1 LI = List Data Registers
2 DEL = Delete Register Entry(ies)
Operation =CH : _
2.1.2 CH, Change Data Entry
Operation CH is used to change "KEY" entries or to make new ones.
Function call-up
Main menu