User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function MXD 2-195
2.21.4 L8, List Entries in Octal
This provides a listing of MXD Registers in octal code and can be restricted by the
following criteria:
•
Address
With exception of the octal information, the contents and format of the list are identical
to the
RPT,MXD
MD report. The report is described in detail under this function.
T8 11:28:35 Function=PNT : MXD
Operation=CH : ?
0 CH = Enter Sheddable Loads
1 LI = List Load Shedding Entries
2 L8 = List Entries in Octal
3 VE = Remove Faulty Blocks
4 DEL = Delete Entries
Operation=CH : L8
Address=$d100'041 :
Entry = 1
. DO $d100'041 (m17p2) Training Departement
RDO=Off OPMO=5=PS
TGRP =3 Priority=17 System Value=0=Off 0/0
Flag =.
Threshold Value =1=On Min =30 0
Shedded Setting =0=Off Min =20 Max =70 0
32/ 1421 0 62041 400 0 43024 36 0
52/ 5 0 0 0
Operation=L8 :
_
Such a listing is used by Landis & Gyr for diagnostic purposes.
2.21.5 VE, Remove Faulty Blocks
If a functional problem occurs a verification should be made. This checks all entries in
the MXD Registers according to the following criterion:
–
do the DO points exist?
–
are all references DO point--> MXD entry made?
If an entry is incomplete or cannot be corrected, it is deleted automatically.
T8 11:32:37 Function=PNT : MXD
Operation=CH : ?
0 CH = Enter Sheddable Loads
1 LI = List Load Shedding Entries
2 L8 = List Entries in Octal
3 VE = Remove Faulty Blocks
4 DEL = Delete Entries
Operation=CH : VE
***** Start of Verification ****
***** End of Verification ******
Operation=VE :
"VE" corresponds to Operation "VE,MXD" (Verification of Maximum Demand File)
Note