User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-216 Function PMD Landis & Staefa Division
2.23.1 Initial Access and Handling
CTRL/P PMD
As the following example shows, the content of the report can only be analysed by L&G
specialists.
T8 15:43:35 Function=PNT : PMD
Output Device =$TT:
342 = Trap 250: MM-Abort v14.04.012
23.07.1996/Tu 12:17:12
Bclock=30764.141310 SECcnt=16320
CPU: 11M70
Interruptlevel: 0
Projectname Language 0:
Projectname Language 1: Training Departement
PC = 100460 = BGD1 + 460 (33072. = 201|060)
PSW= 000005 Priority = 0 Flags: T=0 N=0 Z=1 V=0 C=1
R0 = 160012 (57354. = 340|012)
R1 = 147401 = FD0001 + 7401 (52993. = 317|001)
R2 = 140032 = FD0001 + 32 (49178. = 300|032)
R3 = 130001 = FD0012 + 10001 (45057. = 260|001)
R4 = 120032 = FD0012 + 32 (40986. = 240|032)
R5 = 61040 = CSL004 + 40 (25120. = 142|040)
SP = 60712
User-Stack:
60716/100132 = BGD1 + 132 (32858. = 200|132)
60720/ 40164 = YPRNC + 164 =CSXret (16500. = 100|164)
Failure Area:
100430/ 103420 BCS/BLO A100472
100432/ 4 $jsr ->4441=AABG+40
100436/ 103415 BCS/BLO A100472
100440/ 13702 MOV @#A22706,R2
100444/ 16201 MOV 177764(R2),R1
100450/ 20162 CMP R1,177772(R2)
100454/ 103002 BHIS/BCC A100462
100456/ 112123 MOVB (R1)+,(R3)+ <===== Fail
Instruction
100460/ 773 BR A100450
100462/ 104411 TRAP 11,->7602=AA24+202
100466/ 104405 TRAP 5,->111060=DIL2+60
-Stack:
-------
FUNC <----- (CSC#=240 BL=22)
R2 = 0 ( 0. = 000|000)
R3 = 12150= YRDAT + 2150 ( 5224. = 024|150)
R4 = 17426= YRDAT + 7426=T9DAT( 7958. = 037|026)
Stack:
60756/101560 = FUNC + 1560 (33648. = 203|160)
60760/101056 = FUNC + 1056 (33326. = 202|056)
MEM1 <----- (CSC#=261 BL=20)
R2 = 0 ( 0. = 000|000)
R3 = 12150=YRDAT + 2150 ( 5224. = 024|150)
R4 = 17426=YRDAT + 7426=T9DAT ( 7958. = 037|026)
Function call-up