User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function PNT 2-221
ctrl/P
T8 11:24:56 Function=PNT : $100'001
+ AI RO'OM'TEMP"01 Training Department
65.2 Deg. C ERSTA= >HIL=20.0 OPMO=5=PS
Parameter=AI : ?
MAIN Parameter
(AI ,ERSTA )
OPERATING Parameters
(ALbeg,ALend,ERSTA ,INCEMV,MACT ,OPSTA ,PICT ,PNTSUP,RSUP,SCC ,
SCCD ,WHEN ,WHY )
CONFIGURATION Parameters
(ALconf,CON1,CON2,CPNR,CTYP,DEL01,DEL10,DISL,DISLo ,EPR2,ERSUP ,
EVE ,FICT ,FMT ,FST ,GPA ,HIL,HIWL ,LOL,LOWL ,MSGP ,
MSGSUP,MSGT(1),MVSID,NAME,NAMEd,OCOR,OPMO,OPSUP,PARINT(1)
,PARNTo(1),
PLSUP ,PLSUPs,PRIO,PSM,RAN,ROUND ,SCCL ,SCDL ,SEMV ,SIDEMV,
STAC ,TRAN ,TXC ,TXCR ,TXI ,TXI2,TXU ,TXUaer,exCFG )
SERVICE Parameters
(AERSTA,AICMAX,AICMIN,AIRMAX,ARC,ARCM,DPD,EMV ,ERLST ,ERTST ,
EVD,GROUP ,IDC,MSGDEV,MV ,MVINF ,MVSTA ,OPLST ,OSV ,PCPA ,
PCWHEN,PCWHY,PStyp,RITA,RxTim,SST,SSTA,QEVE,TYP,TA ,TELE ,
TEVE ,WHEN2 )
Parameter=AI :
An operator may call up a full listing of parameters which lie under his access authority
by input of an asterisk ("*"). The list not only shows the parameters involved but also
their current values. The listing is in alphabetical order and arranged in the four
categories - MAIN, OPERATING, CONFIGURATION and SERVICE parameters.
In the case of indexed parameters (MSGT in the example), the parameter with index '1'
is displayed.
T8 11:31:54 Function=PNT : $100'001
+ AI RO'OM'TEMP"01 Training Department
65.3 Deg. C ERSTA= >HIL=20.0 OPMO=5=PS
Parameter=AI : *
MAIN Parameter
- AI | Analogue Input (Measurement) =65.3 Deg. C
- ERSTA | Error Status =1= >HIL
OPERATING Parameters
- ALbeg | Begin Time of Alarm =26.07.1996 11:24:37
- ALend | End Time of Alarm =25.07.1996 16:57:32
. :
. :
CONFIGURATION Parameters
ALconf | Configured as Alarm Point =0=No
- CON1 | Point Configured in Primary PI =1=Yes
. :
MSGT(1)| Message Type =0
. :
. :
SERVICE Parameters
AERSTA | Application Error State =0
- AICMAX | Value Range: Upper Limit =152 Deg. C
. :
. :
Parameter listing with
"*"