User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function BCKP 2-7
Explanations
.. SY Bsy School hall Zug A:Master 100000: Shadow Updating
The Shadow version is re-structured, since the old one is more than one hour old
MM0: Initialisation
Tape is initialised.
MM0: 08:35:03 Cmd-file-specifier: MMSAVE.COM
;*** Save code from disc to magnetic tape V002 4-Jan-96 ***
The tape is first re-spooled then the Shadow version is copied.
Meaning of messages:
SY1: 0 ---> MM0:
The contents of system disk SY1, starting at block 0, will be copied to tape unit MM0:
0, 10000/ 47760 kkkkkkkk
| | | +-> every 1000 copied blocks are
| | | acknowledged with a "k".
| | +---------> blocks still to be copied.
| +----------------> copied blocks
+----------------------> start block
MM0: 08:45:01 Cmd-file-specifier: MMCMP.COM
;*** Compare code from magnetic tape to disc V002 4-Jan-96 ***
This shows a comparison ("compare") is made between the system's and tape's
Shadow versions.
MM0: 08:56:17 Please wait until tape stops okay!
This message appears after re-spooling the tape and indicates a successful Shadow
backup.