User Manual
CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-274 Function RPT Landis & Staefa Division
2.28.15 MDR, Maximum Demand Load Report
The maximum demand load report (MDR) gives the user an overview of:
•
the major parameters of the respective maximum demand point
•
all sheddable loads and all connectable energy generators that are assigned to the
maximum demand point via the tariff group.
•
Important: All data displayed are instantaneous values (current values at the time of
printing, NOT at the report start time).
When the report is started, the address of one or more maximum demand points must
be entered.
T8 15:10:01 Function=PNT : RPT
Rpt.Type=SRPT : MDR
Address=$d100'MBUS : $100'020
Output Device =$TT: ?
Tn = Tn (n=1..18) of own system
$TT = own device
P = Printer (set with PRT Parameter)
Output Device =$TT:
Insert Form Feed =.: ?
Insert Form Feed =(&,.,*,+=,-=,before,after): >>o.k.!
MDR 15:10:23 R E P O R T - S T A R T 13.08.1996/Tu T8
Selected Address Range = $100'020
Max. Demand Rpt. Tariff/Meter Grp 0
****************************************************
?HW MD $100'020 (m9p1) LS=0.0 kWh O.k. 15 Min.;
ONLM/OFLM=0.0/0.0 kWh; PNTOT=0.0 kW; ESTM=0
CI | Counter Input =0.0 kWh
TGRP | Tariff/Meter Group =0
TPER | Integrating Period [Minutes] =0
EMAX | Integrating Period Maximum =0.0 kWh
STOL | Start Tolerance =0.0 kWh
TTOL | Target Tolerance =0.0 kWh
ADM | Actual Daily Maximum =0.0 kWh
- ADMT | Time of Day's Maximum =15:09
EMDAY | Estimated Program MD: Day =0.0 kWh
- EMDAYT | Time of Estimated Prog. MD: Day =15:09
ADMPV | Previous Day's Maximum =0.0 kWh
- ADMPVT | Previous Day's Maximum: Time =00:00
EMPVD | Estimated Prog. MD: Previous Day =0.0 kWh
- EMPVDT | Time Est. Prog. MD: Previous Day =00:00
PMAX | Program Maximum =0.0 kWh
- PMAXD | Date of Program MD =dd.mm.yyyy
- PMAXT | Time of Program MD =15:09
EMPER | Estimated Program MD: Period =0.0 kWh
- EMPERD | Date Estimated Prog. MD: Period =dd.mm.yyyy
- TEP | Time Estimated Prog. MD: Period =15:09
Demand / Load =?????/????? to ??? Min.
--------
Nominal Load Shed =0.00 kW
========
MDR 15:10:26 R E P O R T - E N D 13.08.1996/Tu T8
Report selection