User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function STAT 2-305
Message Type =PNT&PCH&ACPT&SLV&REST: ?
PNT = Point Messages
PCH = Param. Changes
ACPT= ACPT Messages
SLV = Statistic Slaves
CB = COLBAS Message
REST= All other Mess.
Message Type =PNT&PCH&ACPT&SLV&REST:
STA 13:42:43 R E P O R T - S T A R T 06-11-95/Mo T1
from: 05-11-95/Su 00:00
upto: 06-11-95/Mo 13:41
(Oldest Entry : 31-10-95/Th 05:56)
Recorded Date : 05-11-95/Tu
.. ST 06:09:03 A02'B5'02"MXD Group 3 lighting
STEP3 Remote
.. TY 08:26:55 &Ty4 Terminal 4 Normal
HAND ST 08:34:24 a01'b2'ST MSGP =0 ----> 2 100 T4
Recorded Date : 06-11-95/Mo
MRR SC 00:00:08 A01'EG'L0"20 Fan B: from 02-05-95 1995h In Serv.
SRR SC 12:18:11 a01'b2'SC SC =---> RVAL=(1)
... ME 13:41:57 $12'003 Extract temp. 25.9Deg.C
STA 13:42:55 R E P O R T - E N D 06-11-95/Mo T1
Operation =LIST : _
2.30.2.1 Statistic Time Interval
A user may specify a time range for retrieving messages from the Register. The
maximum time range covers from the oldest stored message up to the actual present
time. In the STAT dialogue, the system always prompts the day of recording the oldest
message with 00:00 hours followed by the actual time as a second prompt.
The desired interval start and end times for data output can be specified as follows:
Date with time
Time only
Date only
Positive or negative number of minutes, hours, days or months:
The system calculates the hour, day or month forwards or backwards (-) from the actual
time.
Days:
The related point in time will be fixed at the specified day at 23:59 hours of the next
week or 00:00 hours of the previous (-) week.
If a positive or negative (-) number is entered without units the system then
automatically calculates in days.
Present time
Time interval ending at the maximum possible time of 31-Dec-2027 22:53.
Time interval starting from the past possible time of 01-Jan-00/Su at 00:00
Input of 0 Hour, O Day, or 0 Mnth.
If a zero is entered together with a unit (e.g. 0Hour, 0Day, 0Mnth) the time interval start
goes back to the beginning of the current hour, day or month respectively and ends
automatically at the present time.
(dd-mm-yy) (hh:mm)
(hh:mm)
(dd-mm-yy)
(-100..100),
(Min, Hour,Day ,Mnth)
(Mo..Su), -(Mo..Su)
(-100..100)
(.)
(*)
(-*)
Examples
Entry: 0 Hour, 0 Day or
0 Mnth