User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-310 Function STAT Landis & Staefa Division
2.30.4 LFCO, Review of Fault Condition Messages
Operation LFCO provides a listing on the user's terminal or printer which gives a review
of 'fault condition' messages held in the statistics register. These messages are
tabulated together with the current warning condition (WCON) state marker, related
address (ADDR, TA) and the number of related fault condition states (Normal: FCON=0,
Fault: FCON=1) during the specified interval, listed in a table.
Contrary to Operation LIST, messages can be selected according to the following
criteria:
–
Statistic time interval
–
Messages with addresses
ctrl/P
T4 11:01:45 Function =PNT : STAT
Operation =LI : LF
from 28-04-95/Th 00:00 :
upto 05-12-95/Mo 11:01 :
Message Category=NAME:
Address Mask =A02'B2'** :
STAT 11:02:19 R E P O R T - S T A R T 05-12-95/Mo T4
from: 28-04-95/Th 00:00
upto: 05-12-95/Mo 11:01
FCON: 0 1 2 3 4 5 6 7
-------------------------------------------------------------------------
. ME a01'b2'MW 10 1 . 2 8 . . .
*** PS a01'b2'US 112 19 . . . . . .
.. SY a01'b2'SY 30 . . . . . . .
... RI a01'b2'RI 11 11 . . . . . .
STAT 11:12:00 R E P O R T - E N D 05-12-95/Mo T4