User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function TRR 2-331
T8 14:24:32 Function=PNT : TRR
Operation =CH : LI
Time =* : ?
Time =* , (hh:mm)..(hh:mm), (hh:mm), .: *
Entry =* : ?
Entry =* , (1..255): *
Reaction =.. : ?
UA/TA = Change Point Parameter
CT = Printout Cleartext
MC = Issue MACRO Command
SLVM = Output Slave Message
CB = Start/Stop COLBAS Task
. = No Reaction (for MRR & GRR)
PICT = Auto Picture/Point Selection
Reaction =.. : ..
TRR 14:25:15 Start of D A T A - L I S T 12.08.1996/Mo
T8
11:00 / 1 Mo / Sd1
Reaction PACH_Change Point Parameter
Address DO $d100'041
Parameter DO___Set Digital Output: Priority=0
Value 0=Off
Reporting MSGDEV M1
TRR 14:25:15 End of D A T A - L I S T 12.08.1996/Mo
T8
The list of reaction entries can contain so-called "questionable status markers", which
have the following meaning:
The blocking flag's value in the reaction entry does not correspond to the flag's current
value, i.e. the entry is currently blocked.
Example for ?FL
11:00 / 1 Mo / Sd1
Reaction PACH_Change Point Parameter
Address DO $d100'041
Parameter DO___Set Digital Output: Priority=0
Value 0=Off
Reporting MSGDEV M1
15:00 / 4 * / .
Blocking Flag BL'OC'KING"01
Off
?FL_____TRR Blocked!________(BL'OC'KING"01.RFL=Step 1)
Reaction PACH_Change Point Parameter
Address DO $d100'040
Parameter DO___Set Digital Output: Priority=0
Value 1=On
Reporting MSGDEV M1
TRR 11:34:43 End of D A T A - L I S T 14.08.1996/We
T8
Questionable status
markers
?FL