User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-342 Function TXCM Landis & Staefa Division
The following key combinations can be entered while entering text:
–
<CTRL><G>:
If this entry is made at the end of a text, the next time the text is called up (e.g., call-
up of a plant point by a process reaction), a tone will be heard.
–
<TAB>:
Tabs are set if the <Tab> key is pressed whereby the value of the tab is fixed at TAB
= 8.
When using <Ctrl><G> and <Tab>, the line editor cannot be used.
Example for a Cleartext Entry
ctrl/P
T4 10:08:32 Function =PNT : TXCM
Type of Text =C:
Last Text Change : 18.01.1999 17:15:43 Alfred Gisler
Operation =CH :
Number =0: 25
C 0025: *** CHANGE FAN BELT ***
= *** CHANGE FAN BELT ***
C 0026: Call LANDIS & GYR Service Engineer-
= Call LANDIS & GYR Service Engineer-
C 0027: Tel. No. 042/33'33'33
= Tel. No. 042/33'33'33
C 0028: _
C 0030: *** CHANGE FAN BELT ***
In this example a single line text has been defined in Cleartext Register entry
number"C 0025".
C 0031: Call LANDIS & GYR Service Engineer-
C 0032: Tel. No. 041/733'33'33
This illustrates that a two-line clear text has been defined in register entry numbers "C
0031" and "C 0032".
The hyphen at the end of a line indicates that it is linked to the next line. Series lines
must always occupy adjacent entry numbers.
2.33.5 TXCM, Various Sub-Functions
The basic rules for the TXCM register also hold for the TXIU register.
Please take the relevant information for the
•
CH, Change Text
•
CH, Delete Text
•
ALAN, Change in All Languages
•
LCTX, List Changed Text Entries
•
LDIF, List Language Discrepancies
•
COPY, Copy or Move a Textblock
•
LABC, List Entries Alphabetically
•
LIST, List Text
from the description of the TXIU function.
Audible tone
Note
:
Explanation:
Single line cleartext
Clear text with following
line
s