User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function CAL 2-19
2.5.4.3 LALL, List All Data
Operation LALL lists all existing entries.
T8 16:01:41 Function=PNT : CAL
Mode=SCAL :
Operation=LIST : LALL
Calendar/PS Date Special Day
--------------------------------------------------------
1 24.07.1996/We =Sd1
1 27.07.1996/Sa =Sd3
1 26.12.1996/Th =Su
1 31.12.1996/Tu =Su
2 01.05.1996/We =Sd2
2 22.09.1996/Su =Sd1
3 01.08.1996/Th =Su
Operation=LIST :
2.5.4.4 DEL, Delete Data
With Operation DEL entries of the selected calendar (calendar number or PS address)
can be selectively deleted.
T8 16:08:01 Function=PNT : CAL
Mode=SCAL :
Operation=LIST : DEL
Accept Every Entry=Yes :
Calendar/PS=. : 1
1 24.07.1996/We =Sd1
Delete=No :
1 27.07.1996/Sa =Sd3
Delete=No :
2.5.4.5 SEND, Send Data/Load into PS
Using the CAL,SEND function, the standard and the PS-specific special day calendar
part
of the BPS is extracted from the DCS calendar. The OPLS=LoSD loading function
is then automatically set and the distribution started.
The PS parameters SDGP and FILE must be correctly configurated as the following
example will show. In cases of conflict, the data of the standard calendar will be
overwritten by the entries of the PS-specific calendar.
T8 10:00:38 Function=PNT : CAL
Mode=SCAL : SCAL
Operation=List : SEND
Calendar/PS-#=. : 1&2 o.k.
Other possible inputs for
"Calendar/PS #=."
:
$33'PS PS address
Note