User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division System Messages --- DCS Messages 3-29
Communication Error while xxx
DIAG 00:00:00 NAME
Communication Error while xxx (Err=
->DEVINI (M.COER)
y.zzz) (By= bb rxF= rr txF= tt)
A special transfer tool is available for exchanging data between a VISONIK server and
process stations and partly between partner systems (link system).
This message should assist in localising communications problems between partners.
As a rule, a related message is simultaneously generated which shows the behaviour of
the error.
Message coding:
–
NAME TA of the communicating partner.
–
xxx Names the data transfer user (Example: Dacq, SaFi, etc.)
–
y Transfer level (ASN1 operation)
–
zzz Error number (faulty event)
–
bb Net number of bytes transferred before an error occurred.
–
rr Number of ASN telegrams received before an error occurred.
–
tt Number of ASN telegrams transmitted before an error occurred.
This message is a diagnostic aid and is meant for analysis by specialists and is only
output under severe diagnostic conditions ($SY,TRBI=200).
It is thus practical to initiate severe diagnostics when problems appear in the following
backup functions:
–
Dacq Data acquisition
–
Macq Message acquisition
–
SaFi Load PS data from PS to DCS.
–
LoFi Load PS data from DCS to PS.
–
SaTi Load TSP data from PS to DCS.
–
LoTi Load TSP data from DCS to PS.
–
SaSD Load SDC catalogue from PS to DCS.
–
LoSD Load SDC catalogue from DCS to PS.
–
SaTX Load PS text from PS to DCS.
–
LoTX Load PS text from DCS to PS.
–
Pro,.. Report on partner systems (link system).
–
Edi,Copy Copy VISONIK DCS Files to/from partner DC Servers (link system)
–
Dap,Gen Generation of data record locations from partner DC Servers (DP3, link
system)
–
Dapp,.. Graphical presentation of data from partner DC Servers (DP3, link
system).
Explanation
Action