User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
3-64 System Messages --- DCS Messages Landis & Staefa Division
*Macq* Mtxx: DATE TIME text
STAP TYP 00:00:00 NAME
*Macq* Mtxx: DATE TIME text
->MSGDEV (M.MTxx)
Messages in the message buffer of a PS can be transferred to the DCS and stored in
the ZMS cyclic message memory using the MACQ backup operation (= message
acquisition).
(For more detailed information about the PS message buffer, see the "System
Handbook EKL X and PRV" or "System Handbook BPS").
The time point of message acquisition is indicated in the PS with 'DATUM UHRZEIT'
(date-time).
Depending on message type, 'Mtxx' can appear instead of 'text':
Mt00: PS message with the information ERR, ER1, ACCU and AUT
Mt01: Standard point message with MV and ERSTA
Mt02: OST Zone message with ZOSTA, ASPH, ASPC and TI
Mt03: Operating hours message with SCC, OHx and OHL
Mt04: 3 temperatures (in degrees Celsius)
Mt05: 3 values
Mt06: 2 energy values (in kWh)
Mt07: 2 counter values
Mt08: 2 values
Mt09: Free message with text (max. 10 characters) and a value
Mt10: Text message (max. 14 characters)
None.
Explanation
Action