User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-26 Function CB Landis & Staefa Division
In the following commands a Task designator may be entered, where commands EDIT,
LOAD, SAVE are only effective in TSK1 to TSK40.
DIR
DIR [task] ---> e.g. DIR [33] or DIR TSK33
DIR VAR [task]
EDIT #file,[task] ---> e.g. EDIT #35,[33]
LIST [task]
LOAD #file,[task]
SAVE #file,[task]
SCR task ---> e.g. SCR 35 or SCR35
TSK task
Input of ranges is permitted as illustrated in the following examples:
[1..3] Task 1 to Task 3
[..6] From the first Task to Task 6
[4..] From Task 4 up to the last Task
[*] All Tasks
[..] [] Identical to [*]
TSK12..25 Task 12 to Task 25
TSK22,33 Task 22 to Task 33
TSK* All Tasks
LIST [4..8] or LIST TSK4..8 or LIST TSK4,8
Instead of range, characters ".." a comma "," is also accepted!
Line numbers are specified without any special marking. In the following commands,
line numbers may (for DEL must) be entered:
DEL line
LIST [task] line
LOAD #file,[task] line
SAVE #file,[task] line
LOAD #35,[17]100 Load,
| | |
| | +---> Line 100 of,
| +------> Task 17 in,
+-----------> File 35 to the selected TSK.
LOAD 40,90 ------> Lines 40 to 90 from the
subsequently specified File,
and Task, are loaded.
Line numbers may also be specified as ranges where the same syntax rules as for Task
numbers apply.
Syntax for TASK-#
Syntax for LINE-#