Manualshelf

User Manual

ManualsBrandsSiemens ManualsBuilding automationMounting and Installations Handbook Building Process Station, BPS P-Bus, I/O Module System
501502503504505506507508509510
CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
3-122 System Messages --- DCS Messages Landis & Staefa Division
Unknown Identification: xxx
STAP TYP 00:00:00 NAME
Unknown Identification: xxx
->MSGDEV (M.UNID)
Terminal NAME has reported an unknown self identification. xxx represents the
unknown identification sequence without the preceding <ESC>[ (octal).
This message is caused by connecting a terminal that is not yet supported by the
VISONIK DC Server.
Check the identification with trace. If unknown, then please inform Landis & Staefa
FS&PM.
If the terminal is a display unit, parameter TYX=. can be set. This switches the terminal
to NORMAL and inhibits the identification.
Explanation
Action