Manualshelf

User Manual

ManualsBrandsSiemens ManualsBuilding automationMounting and Installations Handbook Building Process Station, BPS P-Bus, I/O Module System
521522523524525526527528529530
Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division System Messages --- DCS Messages 3-147
xx(yy) No Output possible after zz
STAP TYP 00:00:00 NAME
xx(yy) No Output possible after zz
->MSGDEV (M.FSX9)
System yy of a link system attempts to make an output (e.g., reaction picture) using
function xx (e.g., FSG) to the terminal.
The terminal is not accessible, but the system has not (yet) recognised it as defective.
Switch on/check the terminal. It may have happened that the terminal was switched off
without cleanly quitting the application. In this case it is sufficient that the terminal be
switched on so that the DC Server again can see the terminal and bring the running,
faulty update to a halt.
Explanation
Action