User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
3-150 System Messages --- DCS Messages Landis & Staefa Division
z: a,b x:c,d R0..R4: e,f,g,h,i
PNAM 00:00:00
z: a,b x:c,d R0..R4: e,f,g,h,i
->DEVINI (M.FAT3)
Initiated by:
Any program can initiate this message.
z: --> Program name
a,b --> Offset
x: --> Additional information to the
c,d --> program names
R0..R4 --> Register
e,f,g,h,i --> Register contents
This message is "a dogsbody". It indicates the occurrence of an unexpected, but not
serious condition within a program.
The format of this message depends on $SY,TRBI:
TRBI=2000 The message is stored, as shown here, in the ZMS, but printed on the
DEVINI device as a diagnostic dump (100 Pe=...).
During the boot phase such messages always appear as 100s
diagnostic dumps.
Collect the messages and send to Landis & Staefa FS&PM for clarification.
Messages also appear at the VISONIK DC Server that are not marked with a program
name. The majority of these message types should be interpreted as warnings.
Explanation
Action