User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function CMB 2-41
Message Type=PNT&PCH&Ackn&SLV&REST: ?
0 PNT = Point Messages
1 PCH = Param. Changes
2 Ackn = ACKN Messages
3 SLV = Statistic Slaves
4 CB = COLBAS Messages
5 REST = All other Mess.
Message Type=PNT&PCH&Ackn&SLV&REST:
CMB 09:51:10 Start of D A T A - L I S T 12.08.1996/Mo
T8
from: 09.08.1996/Fr 03:44
upto: 12.08.1996/Mo 09:50
Message Category = Messages with Point Addresses
Selected Address Range = $d100'PS
Message Type = PNT&PCH&Ackn&SLV&REST
(Oldest Entry : 09.08.1996/Fr 03:45)
+----------------------------+--------------------------------+
|. PS rt'z | Training Departement |
+----------------------------+--------------------------------+
KEYB 12.08.1996 09:43:23 EMAX=3---> 1 L&G T8
KEYB 12.08.1996 09:43:32 MSGP=3---> 1 L&G T8
KEYB 12.08.1996 09:43:53 OPMO=1=DS---> 11=DSPS L&G T8
OPMO 12.08.1996 09:43:53 EPR2 /Ev Prior, Secondary PI=0---> 2
KEYB 12.08.1996 09:44:25 OSV=No ---> Yes L&G T8
!OSV 12.08.1996 09:44:25
Outserv (OSV=yes) OPSTA=OSV Ri1-BPS v13
KEYB 12.08.1996 09:44:47 RRS=0=No ---> 1=Yes L&G T8
KEYB 12.08.1996 09:46:20 OSV=Yes ---> No L&G T8
. 12.08.1996 09:46:33
Normal-b (ComReset) Ri1-BPS v13
KEYB 12.08.1996 09:46:34 RRS=0=No ---> 1=Yes L&G T8
CMB 09:51:24 End of D A T A - L I S T 12.08.1996/Mo
T8
If you only request a single address of an address range, the data list will have another
format.
2.7.2.1 Time Interval
A user may specify a time range for retrieving messages from the buffer. The maximum
time range goes from the oldest buffered message up to the actual present time.
VISONIK always outputs the day of recording the oldest message at 00:00 hours as a
first prompt followed by the actual time as a second prompt.
The desired interval start and end times for data output can be specified as follows:
Date with time.
Time only
Date only
Positive or negative number of minutes, hours, days, months:
The system calculates the hour, day or month forwards or backwards (-) from the actual
time.
Days:
The related point in time will be fixed at the specified day at 23:59 hours of the next
week or 00:00 hours of the previous (-) week.
Note:
(dd-mm-yy) (hh:mm)
(hh: mm)
(dd-mm-yy)
(-100..100),
(Min.,Hour,Day ,Mnth)
(Mo..Su), -(Mo..Su)