User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-42 Function CMB Landis & Staefa Division
If a positive or negative (-) number is entered without units the system then
automatically calculates in days.
Present time
Time interval ending at the maximum possible time of 31-Dec-2027 22:53.
Time interval starting from the past possible time of 01-Jan-00/Su at 00:00
Input of 0 Hour, 0 Day, or 0 Mnth.
If a zero is entered together with a unit (e.g. 0Hour, 0Day, 0Mnth) the time interval start
goes back to the beginning of the current hour, day or month respectively and ends
automatically at the present time.
ctrl/P
T8 09:56:12 Function=PNT : CMB
Operation=LIST :
from 09.08.1996/Fr 03:50: -1
11.08.1996/Su 00:00
upto 12.08.1996/Mo 09:56:
In the above example the VISONIK DCS searches the CMB for messages from
11.08.96 00:00 hours up to the actual present time (12.08.1996 09:56 hours).
By entering a full stop "." against the start prompt 'from' and then <CR> at the stop time
'upto' the whole register will be listed backwards. This means the latest message
appears first and so on. Refer to Operation LIRO.
T8 10:01:19 Function=PNT : CMB
Operation=LIST :
from 09.08.1996/Fr 04:01: .
12.08.1996/Mo 10:01
upto 09.08.1996/Fr 04:01:
09.08.1996/Fr 04:01
Message Category=ADDR:
Address=$RI1 : $100'001
Message Type=PNT&PCH&Ackn&SLV&REST:
CMB 10:01:51 Start of D A T A - L I S T 12.08.1996/Mo
T8
from: 12.08.1996/Mo 10:01
upto: 09.08.1996/Fr 04:01
Message Category = Messages with Point Addresses
Selected Address Range = $d100'001
Message Type = PNT&PCH&Ackn&SLV&REST
+-----------------------------+-------------------------------+
|=== AI RO'OM'TEMP"01 | Training Departement |
+-----------------------------+-------------------------------+
=== 12.08.1996 09:40:48
ALsta=Acknow'ged ALvis=Ron
=== 12.08.1996 09:40:48
ALsta=Acknow'ged ALvis=Ron
=== 12.08.1996 09:20:03
ALsta=Acknow'ged ALvis=Ron
=== 12.08.1996 09:20:03
ALsta=Acknow'ged ALvis=Ron
(-100..100)
(.)
(*)
(-*)
Examples
Input: ) Hour,
O Day or 0 Mnth
Input without units
Input of a retrospective
time range