User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-44 Function CMB Landis & Staefa Division
Messages from other systems:
If two or more VISONIK systems are linked together (by Ring, Telephone or V.24),
messages can be exchanged between the systems. Such messages are transferred to
partners in the language of the sending message channel and buffered accordingly in
the destination's CMB.By using search text, messages with specific contents can be
called.
"Txt.Search=*" lists messages from partner systems.
"Txt.Search=H'*" lists messages from partner 'H'.
Message Category=MSG : SYSM
Txt.Search (*/%)= :
The relative search text can be a word segment together with "wild cards" (*/%). Refer
to TXIZ/TXCM descriptions.
2.7.2.3 Message Type
This provides the possibility of selecting buffer messages not only by address but also
by type, such as:
Message Type=PNT&PCH&Ackn&SLV&REST: ?
0 PNT = Point Messages
1 PCH = Param. Changes
2 Ackn = ACKN Messages
3 SLV = Statistic Slaves
4 CB = COLBAS Messages
5 REST = All other Mess.
Message Type=PNT&PCH&Ackn&SLV&REST:
Messages concerning normal point status changes
Messages concerning all kinds of parameter changes
Messages concerning points acknowledged through Function ACPT. Note that Function
ACPT is no longer supported.
Main value messages which have been "dedicated" to any device mask due to a
Reaction program (Slave Messages).
Messages which have arisen from COLBAS Tasks in EKL-X/P substations. By using a
search text, messages with specific contents can be called.
Message Type=PNT&PCH&Ackn&SLV&REST: CB
Txt.Search (*/%)= :
The search text can be a word segment together with "wild cards" (*/%). Refer to
TXIZ/TXCM descriptions.
All "Other" message types
SYSM
"Txt.Search=*"
"Txt.Search=H'*"
PNT
PCH
ACPT
SLV
CB
REST