User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-48 Function CMB Landis & Staefa Division
2.7.6 LOCT, List Message Buffer in Octal
Operation LOCT provides an octal code listing of messages held in the CMB.
As in Operation LIST messages may also be selected according to Time Interval or
Message Category.
Operation LOCT is mainly for diagnostic purposes.
T8 11:43:23 Function=PNT : CMB
Operation=LIST : LOCT
from 09.08.1996/Fr 06:17: -1
11.08.1996/Su 00:00
upto 12.08.1996/Mo 11:43:
12.08.1996/Mo 11:43
Message Category=ADDR:
Address=RO'OM'TEMP"01: $100
Message Type=PNT&PCH&Ackn&SLV&REST:
CMB 11:43:52 Start of D A T A - L I S T 12.08.1996/Mo
T8
from: 11.08.1996/Su 00:00
upto: 12.08.1996/Mo 11:43
Message Category = Messages with Point Addresses
Selected Address Range = $d100'PS
Message Type = PNT&PCH&Ackn&SLV&REST
+---------------------------+------------------------------+
|. PS rt'z | Training Departement |
+---------------------------+------------------------------+
KEYB 12.08.1996 09:43:23 EMAX=3---> 1 L&G T8
Seg# = 63 Blk# = 27
7246/ 0 0 60000 140414 25427 411 1 20007
7266/ 3 0 3 0 11075 10000 1 62030
7306/ 4 3 140000 0 72001 3 0 1
7326/ 0 15 0 310 177776 31016 52664 1
7346/ 0 0 0 0 0 0 20000 20040
7366/ 20040 20040 20040 23572 71164 0 0 0
7406/ 0 0 0 0 0 0 0 0
7426/ 0 0 0 0 0 0 0 0
7446/ 0 0 0 0 0 0 0 0
7466/ 0 0 0 0 0 0 0 0
7506/ 0
2.7.7 DEL, Cancel Outstanding Messages
Messages which cannot be output for some reason (e.g. terminal "Out of Service") are
simply queued in the CMB. Often they can cause a flood of message outputs whenever
such an output terminal is brought back on line.
Operation DEL can cancel such a flood of messages without actually deleting messages
held in the CMB. They are simply not printed out.
There are various cancel operations which may be separately specified, according to,
–
Message Channels (M1..M15)
and
–
Message priority (MSGP=0..3)