User Manual

Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function COS 2-53
Net length (bytes) required for picture program code not including channel entries.
Memory space available for picture extension or further channel entries.
Memory demands for a picture compete with those for channel entries.
Picture version number.
This number indicates the status of the internal picture revision and is used for
diagnostic purposes.
See OPERATION EDI
See OPERATION EDI
Date of last change.
Time of last picture change.
Name of operator who made the last change.
Picture changes include not only those made through an Insight/COS unit but also any
picture or channel manipulations made using the Server Function COS.
Address references defined with Operation"COS,PICT".
2.8.4.2 UTIL,EDI, Edit Picture Information
This is for editing picture titles, picture access levels and defining a picture's revision
status number.
This EDI operation must not be confused with the COS instruction MCR>EDI.
[A picture number in the range (1..max)]
This results in the display of a contents list of the selected picture.
Refer also to Operation DIR example.
[0..255.]
This is a freely definable revision number for each picture and can be used for
specifying picture selection in operation DIR.
[0..7]
An access level [0..7] can be given to every picture to protect against illegal actions. The
effect is the same as a Function's access level, i.e. if some kind of change is to be made
in a picture, should it be either through Server Function COS or MCR>EDI instructions
of the COS, the operator's authority level is compared with the picture level and access
is accepted or refused accordingly.
Each picture can be given a title having up to 60 characters. This title appears as
heading picture information in Operation DIR and also appears with Operation
COS,PICT,LPIC.
B.Length
Free
Version
Level
Status
Entry
EntrTime
Operator
Address
Pict.No.
Status
Level
Title