User Manual
CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-56 Function COS Landis & Staefa Division
[Point..OperName] Active Point Type.
This explains what should be updated and how.
Through Insight/COS units it is possible to actively update various values or to take
various actions, such as:
–
Update point parameters, (Point)
–
Update Pool variables (CBPool)
–
Call up following picture (FollPict)
–
Execute macros (Macro)
–
Start/stop COLBAS Tasks (CB Task)
–
Show language-dependent text (Text)
–
Show operator’s name (OperName)
Second Dialog Section
The subsequent second dialogue section depends very much on the selected active
point type. Therefore each selectable ‘Active Point Type’ (Act. Type) will be described in
the following dedicated sub-chapter.
Second Dialogue Section, Act.Type “FollPict - Display Following Pictures”
This allows an exit from a picture, call for Help or jump to another picture by using the
cursor.
[NextPict..RI Pict] Display Following Pictures
NextPict Display Next Picture.
System address [Name of the partner system on which the picture is
located or (octal) number of the link process station]
Pict.No. [a picture number in the range (1..max)]
PrevPict Display Previous Picture.
The previously selected picture is displayed. For each Insight/COS
unit, VISONIK can store a picture sequence of up to 7 pictures. These
pictures can be paged backwards using 'Previous Picture'.
(only works within the pictures of one DCS)
HomePict. Recall Initial Picture.
If such a channel is activated by the cursor then the initial picture, i.e.
that picture which was originally called up, is displayed.
(only works within the pictures of one DCS)
[Black..LghtGrey, No Change, Transparent]
This allows colour selection, from the 18 possibilities, for the object which the active
channel represents.
No change: The object colour(s) from the Insight Picture Editor are adopted.
Transparent: The object is invisible.
[Yes, No]
Defines if the object represented by the related active channel shall blink or not.
Act.Type
Colour
Flashing