Manualshelf

User Manual

ManualsBrandsSiemens ManualsBuilding automationMounting and Installations Handbook Building Process Station, BPS P-Bus, I/O Module System
71727374757677787980
Siemens Building Technologies VISONIK DCS Functions and System Messages VVS18 CM2U8567E / 04.1999
Landis & Staefa Division Function COS 2-57
Second Dialogue Section: Active Point Type "Macro - Start Macrotexts (TXCM)"
This allows for running any macro from the macro library 'TXCM' of the DCS.
[0..340]
Input any required legal macro number.
[Black..LghtGrey, No Change, Transparent]
This allows colour selection, from the 18 possibilities, for the object which the active
channel represents.
No change: The object colour(s) from the Insight Picture Editor are accepted.
Transparent: The object is invisible.
[Yes, No]
Defines if the object represented by the related active channel shall blink or not.
Second Dialogue Section: Active Point Type "Text - Specific Language Text
Active"
Activates project language text.
This enables display of any text from the Server's text registers.
[P, S, N, Q, L, V, Up, Ip, M, C, Hp, Ug, Ig, Hg, Um, Im]
Select required text register.
[0..max.]
Input any required legal text number.
[Black..LghtGrey, No Change, Transparent]
This allows colour selection, from the 18 possibilities, for the object which the active
channel represents.
No change: The object colour(s) from the Insight Picture Editor are accepted.
Transparent: Not meaningful for text.
[Yes, No]
Defines if the displayed text shall blink or not.
Second Dialogue Section: Active Point Type "CB Task - Start/Stop Central
COLBAS Tasks"
This enables Server COLBAS Tasks to be started or stopped.
[1..40]
Input any required legal Task number.
[RUN, STOP, RESTART, END]
Input one of the four possible commands:
RUN Initialise and start COLBAS Task.
STOP Stop COLBAS Task (with message).
RESTART Start COLBAS Task (without init.).
END End COLBAS Task (without message).
[Black..LghtGrey, No Change, Transparent]
This allows colour selection, from the 18 possibilities, for the object which the active
channel represents.
No change: The object colour(s) from the Insight Picture Editor are accepted.
Transparent: The object is invisible.
[Yes, No]
Defines if the object represented by the related active channel shall blink or not.
Text No.
Colour
Flashing
Type of Text
Text No.
Colour
Flashing
Task No.
Task commands
Colour
Flashing