User Manual

CM2U8567E / 04.1999 VISONIK DCS Functions and System Messages VVS18 Siemens Building Technologies
2-66 Function COS Landis & Staefa Division
VISONIK accepts only one picture number per address/address mask.
Picture numbers can be changed by entering the address or address mask involved.
Tha system now gives a response showing the picture number associated with the
entered address or address mask. This picture number can now be changed:
A successful entry in the picture register is confirmed with “ok!”.
2.8.6.2 PICT,LADR, List Address to Picture Number
This provides a listing of the complete picture register arranged according to addresses.
Operation=CH : LADR
Pict.No.= 31 Address = a01’12’ “****
Pict.No.= 33 Address = a01’13’ “****
* *
* *
Operation=LADR -
2.8.6.3 PICT,LPIC, List Picture Number to Address
This Operation provides a listing of a desired picture register section which can be
defined against “Pict.No.=*:” The listing is arranged according to picture numbers.
Operation=CH : LPIC
Picht.No.=*: ?
Picht.No.=*, (1..160): 40..42
Building B
Pict.No.= 40 Address = b ? ? “****
VISOGYR 02 Unit
Picht.No.= 41 Address = b01’ ‘ “****
Heating Unit
Pict.No.= 42 Address = b0 ‘ ‘ “****
Heating Unit
Pict.No.=42 Address = b02’ ‘ “****
Operation=LPIC:_
Picture titles are edited in COS pictures with Function COS,UTIL,EDI
Change Picture Number