User Manual

Siemens Industry, Inc.
Smart Infrastructure
A610347523_en--_e6
stnelaviuqEgnimmargorPsueZ:2elbaT
ledomEADSEV)EADSEV(N/PsnemeiSnoitpircseDEADSEVsasueZnideyalpsiDledomtnelaviuqePLVN/PsnemeiSPLVnoitpircseDPLV
P1-00A-PEV1A-03Z-33345SepiP1,sDELhtiwPEV#enoZ/wCLV505-CLV398996-005
RESAL505-CLVADSEV
epiP-1tcapmoC
teNADSEV
aivelbakrowteN
P-00A-PEV1A-82Z-33345SsDELhtiwPEV#enoZ/wPLV004-PLV818996-005
004-PLVADSEV
htiwrotceteDSULPresa
L
sthgilDELsutatsKO&eriF
P-01A-PEV1A-92Z-33345SyalpsiD"5.3htiwPEV#enoZ/wPLV200-PLV918996-005
SULPresaL200-PLV
sedulcni(ROTCETED
yalpsiDlargetnidnarotceted
eludoM
00A-UEV1A-1F-33345SsDELhtiwUEV#enoZ/wPLV004-PLV818996-005
004-PLVADSEV
htiwrotceteDSULPresaL
DELsutatsKOdnaeriF
sthgil
01A-UEV1A-23F-33345SyalpsiD"5.3htiwUEV#enoZ/wPL
V200-PLV918996-005
SULPresaL200-PLV
sedulcni(ROTCETED
yalpsiDlargetnidnarotceted
)eludoM
P-00A-SEV1A-43Z-3334
5S
htiwrennacSE-ADSEV
syalerdnayalpsidDEL
#enoZ/wSLV007-SLV428996-005
KOFLER-21/DAEHNACS
yalpsidDEL
P-01A-SEV1A-53Z-33345S
"5.3htiwrennacSE-ADSEV
yalpsiDDCL
#enoZ/wSLV403-SLV628996-005
-YLR21/SID/DAEHNACS
yalpsiDlluF
HNET Connection The VPM can be connected to the HNET either Style 4 or Style 7. Refer to the Zeus
configuration for the proper Style. In either case, the VPM can be connected in the
middle of an HNET. For a Style 4 network, the VPM can also be connected at the end.
If the VPM is connected at the end, care must be taken to properly terminate the
HNET. See Figures 8 and 9 for the wiring instructions when the VPM is in the middle
and Figure 10 when the VPM is at the end of the network.
In a single enclosure system the VPM requires a NIC-C in this enclosure.
SECIVEDELBITAPMOC®tenADSEV:1elbaT
SEDONSTNEMELESEDONSTNEMELE
SUCOFresaL
**/*052-FLV11
RENNACSresaL
SROTCETED
002-SLV15
*005-FLV11 003-SLV15
TCAPMOCresa
L 505-CLV11 006-SLV15
SULPresaL
SROTCETED
004-PLV11 007-SLV15
010-PLV11 402-SLV15
200-PLV11 403-SLV15
210-PL
V11 013-SLV15
E-ADSEV
****P1-00A-PEV11 412-SLV15
***P-00A-PEV11 413-SLV15
***P-01A-PEV11 012-SLV15
***00A-UEV11 *****P-00A-SEV15
***01A-U
EV11 *****P-01A-SEV15
LAIRTSUDNIresaL **588-ILV11
RECARTeriF **51-TFV6161
tenADSEV010-CIVseriuqeR* ® draC
ehtneew
tebdellatsniebtsumrepmuja,srotcetedesehtnO**tenADSEV ® A.dleihsriapBdnariap
raludoMORPsurebreC/raludoMytef
aSeriFogiseD/SLXybdezingocerera01A-UEVdna,00A-UEV,P-01A-PEV,P-00A-PEVsledomehT***
.sliatedrof2elbaTeeS
.PLVsledomsaslenaperif
2elbaTeeS.CLVsledomsaslenaperifraludoMORPsurebreC/raludoMytefaSeriFogiseD/SLXyb
dezingocersiP1-00A-PEVledomehT****
.sliatedrof
sledomsaslenaperifraludoMORPsurebreC/raludoMytefaSeriFog
iseD/SLXybdezingocereraP-01A-SEVdnaP-00A-SEVsledomehT*****
.sliatedrof2elbaTeeS.SLV
It is recommended to configure the VFT-15 in a non-latching mode.
If latching is desired, the detectors must be manually reset prior to exiting walktest.