Data Sheet for Product

Siemens
Smart Infrastructure – Building Products
–6–
usa.siemens.com/fire
Multi-Mode Ethernet Module
The Multi-Mode Ethernet Module (Model VN2002-A1)
serves as a network connector between Siemens fire-only
FACPs and with intelligent voice-communication panels, via
multi-mode fiber-optic cables.
Model VN2002-A1 mounts in either or both of the
following:
▪ Voice CPU Card, Model VCC2001-U1 [used in voice
systems]
▪ Modular Ethernet Switch, Model FN2012-A1 [for
use in FACP-only connections]
Voice-Over-IP Module
The VOIP module (Model VCI2003-A1) is used to convert
audio signals between analog and digital Voice-over-IP
signals. This module is mounted to a connection point on
the voice CPU card (Model VCA2001), and is required for all
network voice applications.
For system configurations, the Voice CPU card provides
voice-network support to the following:
▪ VoIP Module (Model VCI2003-A1)
[for Voice-over-IP conversion of audio signals]
▪ up to four (4) CAT5 connections, via the Electric
Ethernet Module, Model VN2001-A1a single-mode
(Model VN2003-A1) or a multi-mode (Model
VN2002-A1) Ethernet module
Remote (‘Class B’) Terminal Board
The Remote (‘Class B’) Terminal Board (Model VTA2001-A1)
provides system support to the 24-Switch Option Module
(Model VTO2001-U2) and the Microphone Option Module
(Model VTO2004-U2) when the aforementioned option
modules function from a remote enclosure.
Model VTA2001-A1 terminal board, which mounts in a 1HU
enclosure, serves as a central station for audio output,
system communication and 24VDC power wiring from the
Desigo intelligent voice-communication FACP on its
network.
Plug-in connectors for the ribbon
cables used on the 24-Switch
Option Module (Model VTO2001-
U2) and the Microphone Option
Module (Model VTO2004-U2) are
also included on each ‘Class B’
board.
LED Driver and Tabular Annunciators
The LED Annunciator Driver, Model FT2007-U1, is the key
component for custom graphic annunciators on all Desigo
addressable fire panels. This optional system module
provides outputs for system status as well as zone status.
Model FT2007-U1 is supervised via a RS−485 interface. A
maximum eight (8) modules are allowed on each RS−485.
The Tabular Annunciators allow system events sent from
Desigo addressable panels to be displayed remotely in real-
time. Tabular annunciators are available in either red or
black. The Model FT2008 series of tabular annunciators has
16 zones, and the Model FT2009 series uses 32 zones.
Up to two (2) LEDs can be used per zone.
SAFEDLINK / FCnet Network Module
The SAFEDLINK network module (Model FN2001-U1) is
used to network up to 32 FACPs or fire terminal units
(Model FT2050), via the FCnet system bus. The SAFEDLINK
network module is plugged into a Standard Operating Unit
or an Operating Unit with LEDs.
Model FN2001-U1 supports ‘peer-to-peer’ networking
with: Model FC2025, Model FC2050 and Model FT2050
Model FN2001-U1 connects to system-bus inputs and
outputs. The module has ground-fault monitoring as well as
an integrated degrade-mode function. Redundant
networking is accomplished with one (1) network module
[simple loop trouble] per FACP. Electrical isolation occurs
between system bus and panel.
Leased-Line / City-Tie Module
The leased-line / city-tie module (Model FCI2020-U1) is used
as an optional module, providing a local-energy output for
municipal call-box connection. Model FCI2020-U1 also gives
a reverse-polarity output for leased-line connection. Model
FCI2020-U1 is installed on the periphery board for Desigo
FACPs, respectively.
When used for connection to a
municipal call box, the city-tie
function supports Alarm-event
transmission. When used for
leased-line connection, the
module supports two (2) leased
telephone lines for transmitting
Alarm, Trouble and Supervisory
events.
Desigo Fire Components
Voice System Components (cont.)
Model
FN2001-U1
Model
VCI2003-A1
Model
VN2002-A1
Model
FT2007-U1
Model
FCI2020-U1
Model
VTA2001-A1