Data Sheet for Product

Siemens
Smart Infrastructure – Building Products
–4–
usa.siemens.com/fire
Model
EBA2004-A1
Model
FH2016-U1
Model
VTO2001-U3
Microphone Option Module
The Microphone Option Module (Model VTO2004-U3) is
used to provide live, non-pre-recorded voice communication
on a Cerberus PRO intelligent voice-communication panel.
Model VTO2004-U3 can serve either as a main microphone
installed in the main-system enclosure, or as a remote
microphone in a remote enclosure. Up to two (2) Model
VTO2004-U3 microphones are supported for each Model
FV922 / FV924 FACP.
Switch Option Module
The Switch Option Module (Model VTO2001-U3) is a series
of front-end, illuminated and programmable pushbuttons
primarily mounted in the middle inner door of each
Cerberus PRO intelligent voice-communication FACP.
Each Model VTO2001-U3 module has 24 group-switches,
thus totaling 48 LEDs, and consists of up to 96 multi-color
LED-status indicators:
▪ RED / GREEN / BLUE
variant in the upper
portion [for activation]
▪ one (1) YELLOW-only LED
[for fault or disable]
Each LED switch-group is assigned
specific functionality during the
configuration process. Additionally, a
pushbutton {for each affected zone}
will illuminate to acknowledge the
command has been received at the
Voice System CPU Card, Model
VCC2001-A1.
If no microphone is used, up to eight (8) Model VTO2001-
U3 switch-option modules can be used in a given three-
eight-unit (3HU) enclosure (Model FHD2007-U3/R3) –
▪ four (4) modules in the middle inner-door, Model
FHD2004-U1
▪ four (4) additional Model VTO2001-U3 modules in
the bottom inner-door, Model FHD2004-U1
Battery Fixing Bracket
The battery fixing bracket (Model FHA2044-U1) is
specifically used in all Cerberus PRO IVC system
configurations ― housing and securing 33AH system
battery sets, which provide auxiliary system power. Model
FHA2044-U1 bracket complies with seismic certification.
DIN rail kit
The optional DIN Rail Kit (Model FHA2031-U1), which also
functions in intelligent voice- communication systems,
mounts in the backbox of a 3HU enclosure, and provides
connection between internal-system wiring and field wiring.
100W Booster Amplifier (and Enclosure)
As an option, the Model EBA2004-A1 Booster Amplifier is a
main board that allows for expansion of speaker zones for
additional power to a Cerberus PRO intelligent voice-
communication system.
100W Booster Amplifier and Enclosure (cont.)
Model EBA2004-A1 consists of a single board with two (2)
50W amplifiers, one (1) built-in battery charger, and
removable terminal blocks for all field wiring.
Model FH2016-U1/R1 is the enclosure used to house the
100W Booster Amplifier.
Approximate size:
23.6" (60 cm.) (H)
18.1" (46 cm.) (W)
5.1" (13 cm.) (D)
Three-Height-Unit Enclosure
The three-height-unit (3HU) enclosure is the largest housing
available for Cerberus PRO panels, and is used exclusively for
voice-system applications.
Orderable in either red or
black, the following
components comprise a
complete three-height-unit
enclosure:
▪ One (1) backbox
(Model FHB2005-U1/R1)
▪ Two (2) inner doors
(Model FHD2004-U1)
▪ Two (2) clear lenses
(Model FHD2006-U1)
▪ One (1) outer door
(Model FHD2007-U3/R3)
▪ One (1) blank plate
(Model FHD2009-U1/R1)
Notes: An enclosure cover (Model FHA2041-R1) is used to protect
the ventilation holes found at the top of red-only, 3HU backboxes
(Model FHB2005-R1).
Model FHA2041-R1 prevents condensation from entering the FACP,
and consequently meets New York City code for uncovered
ventilation holes on fire-systems enclosures.
Approximate size:
42" (106.7 cm.) (H)
21" (53.3 cm.) (W)
7.75" (19.7 cm.) (D).
Voice System Components (cont.)
Three-Height-Unit
(3HU) Enclosure