User's Manual

Configuration Using Web Based Management and the Command Line Interface

System Event for Connection Abort

You can specify how the SCALANCE W 788 reacts to a connection abort (or to the

reestablishment of a connection) in the System > Event Config menu.

Syntax of the Command Line Interface

CLI\IFEATURES\LINKCHECK>

Command Description Comment

linkchk <E|D>

Enable / disable device-related con-

nection monitoring.

add <E|D> <MAC address>

Adds a new MAC address to the

connection monitoring and enables /

disables monitoring for this MAC

address.

clearall

Deletes all entries for connection

monitoring.

6.7.3 Redundancy Menu Command

Note

The redundancy function described here is available only for the

SCALANCE W 788 with two wireless adapters (model name SCALANCE W 788-

2pro).

Redundant Connection between two SCALANCE W 788-2pro Devices

Two SCALANCE W 788 devices each with two wireless interfaces can be config-

ured so that there is a redundant wireless connection. The redundancy function

automatically switches to the second wireless interface is no data transfer is possi-

ble over the first wireless interface. The following settings must be made on both

devices.

Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro

C79000-G8976-C184-01

101