User's Manual

Description of the SCALANCE W 700
2
Components of the Product
The following components are supplied with the SCALANCE W 700:
● SCALANCE W 744-1pro, SCALANCE W 788-1pro or SCALANCE W 788-2pro
● 2 OMNI antennas
● 1 Harting RJ-45 hybrid cable connector
● 1 dummy plug for the M12 socket
● 2 (or 4 for the SCALANCE W 788-2pro) dummy plugs for the R-SMA sockets
● 1 SIMATIC NET Industrial Wireless LAN CD
● These Operating Instructions for the SCALANCE W 700
Please check that the consignment you have received is complete. If it is not com-
plete, please contact your supplier or your local Siemens office.
Requirements for Installation and Operation
There must be a network attachment available for the SCALANCE W 788 since the
device is configured over the Ethernet interface. If no DHCP server is available, a
PC on which the Primary Setup Tool is installed and can be used is necessary for
the initial assignment of an IP address to the SCALANCE W 788. For the other
configuration settings, a computer with Telnet or an Internet browser is necessary.
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
C79000-G8976-C184-01
18