User's Manual

Commissioning
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
24 C79000-G8976-C184-01
Assembling the Hybrid Connector
Remove the two inner shells of the universal
sealing ring to adapt it to the diameter of the
hybrid cable.
Push the bushing, washer, adapted univer-
sal sealing ring and the housing over the
cable jacket.
Strip the cable jacket and braid shield to the
correct lengths.
25 mm for the power leads.
30 mm (jacket) for the data leads (shorten
the braid by 11 mm).
Arrange the data leads according to the
color code on the splice element.
Refer to the table below for the assignment.
Contact and color assignment of the splice
element.