User's Manual

Commissioning
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
26 C79000-G8976-C184-01
Remove the assembled data module from
the IDC assembly tool.
Fit the upper shield plate and press it over
the cable shield.
Then fit the lower shield plate and snap it
into the upper plate (there should be an au-
dible click).
Arrange the power leads and insert them to
the end of the hinged elements of the insu-
lator body.
Refer to the table below for the assignment.
Wire color code (standard)
White /
Blue *
Blue
White /
Brown *
Brown
24 V 24 V Ground Ground
Power supply
insert
1 2 3 4