User's Manual

Configuration Using the Wizards of Web Based Management

Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro

C79000-G8976-C184-01

5.4 Basic Wizard

5.4.1 IP Settings

Description

One of the basic steps in configuration of an Ethernet device is setting the IP ad-

dress. The IP address identifies a device in the network uniquely. On this page,

you enter the information for IP configuration of the SCALANCE W 788.

Specified IP Address / DHCP Server Option Buttons

There are two methods of assigning IP addresses to devices: The IP address can

be set as a fixed permanent address or can be obtained dynamically from a DHCP

server. Select "Specified IP Address" if you do not use a DHCP server.

IP Address Input Box

The IP address of the SCALANCE W 788. Here, you enter an address that is

unique within the network.