User's Manual

Configuration Using Web Based Management and the Command Line Interface

If you want to deactivate the option of configuration with Web Based Management,

you can do this in the Security Wizard. Any settings you make there only take ef-

fect after you restart the SCALANCE W 788.

Syntax of the Command Line Interface

CLI\SYSTEM\SERVICES>

Command Description Comment

telnet <E|D>

Enable / disable configuration of the

SCALANCE W 788 over Telnet.

ttimeout <E|D>

Enables / disables the time restric-

tion for a Telnet session.

ttimeout <time in s>

Specifies the time after which a Tel-

net section is closed if there is no

further input.

web <E|D>

Enable / disable configuration of the

SCALANCE W 788 over Web Based

Management.

snmp <E | D>

Enable / disable SNMP.

psu <E|D>

Enable / disable access to the

SCALANCE W 788 with the Primary

Setup Tool. If this access option is

deactivated, configuration data can

only be read with the Primary Setup

Tool.

Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro

C79000-G8976-C184-01