User's Manual

Configuration Using Web Based Management and the Command Line Interface
CLI\SYSTEM\SERVICES\TRAPS>
Command Description Comment
traps <E | D>
Enable / disable traps.
CLI\SYSTEM\SERVICES\EMAIL>
Command Description Comment
mail <E|D>
Enable / disable SCALANCE W 788
sending mail.
6.2.4 Restart Menu Command
Restart Button
Click this button to restart the SCALANCE W 788. You must confirm the restart in a
dialog box. During a restart, the SCALANCE W 788 is reinitialized, the internal
firmware is reloaded and the SCALANCE W 788 runs a self-test. The entries that
have been learned in the address table of the SCALANCE W 788 are deleted. You
can leave the browser window open while the SCALANCE W 788 restarts.
Memory Reset Button
Click on this button to restore the factory configuration settings. The following pa-
rameters (protected defaults) are not restored:
● IP address
● Subnet mask
● Gateway address
● SSID
● IP address of the default router
● DHCP flag
● System name
● System location
● System contact
● Device mode
● Country code
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
68 C79000-G8976-C184-01