User's Manual

Configuration Using Web Based Management and the Command Line Interface
CLI\SYSTEM\EVENT>
Command Description Comment
setec 1 <E|D> <E|D>
<E|D> <E|D>
Reactions when the
SCALANCE W 788 restarts.
setec 2 <E|D> <E|D>
<E|D> <E|D>
Reaction when establishing a con-
nection monitored with the Link
Check function.
setec 3 <E|D> <E|D>
<E|D> <E|D>
Reaction to aborting a connection
monitored with the Link Check func-
tion.
setec 4 <E|D> <E|D>
<E|D> <E|D>
Reaction to a bad authentication.
setec 5 <E|D> <E|D>
<E|D> <E|D>
Reaction to changing the power
supply.
setec 6 <E|D> <E|D>
<E|D> <E|D>
Reaction to a change in the error
status.
setec 7 <E|D> <E|D>
<E|D> <E|D>
Reaction to a change in the IP-Alive
status.
6.2.6 E-mail Config Menu Command
Sender and Recipient of an E-mail
Here, you specify who the SCALANCE W 788 sends an E-mail to as a reaction to
configured events. You can also enter a sender. This allows you to recognize
which device is involved and sent the E-mail. If you do not make an entry in the
From box, the SCALANCE W 788 uses the following sender: SCALANCE_W@<IP
address>
SMTP Server IP Address / SMTP Server IP Port
In these boxes, you enter the IP address and the port number of your E-mail
server.
Syntax of the Command Line Interface
CLI\SYSTEM\EMAIL>
Command Description Comment
email <E-mail address>
Specifies the E-mail address of the
SCALANCE W 788
smtp <IP address>:<port
number>
Specifies the IP address and port
number of the SMTP server.
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
C79000-G8976-C184-01
71