User's Manual

Configuration Using Web Based Management and the Command Line Interface
Syntax of the Command Line Interface
CLI\INTERFACES\ETHERNET>
Command Description Comment
ethspeed <A|100F|100H|
10F|10H>
Specifies the transmission speed
and mode of the Ethernet interface:
A automatic selection
by the SCALANCE W
788
100F 100 Mbps full duplex
100H 100 Mbps half duplex
10F 10 Mbps full duplex
10H 10 Mbps half duplex
6.3.2 WLAN Menu Command
Network Name and Transmission Mode
In the SSID text box, you specify the network name and in the Wireless Mode list
box, you select the transmission mode. If you have worked through the Basic Wiz-
ard, values are already entered for these two parameters.
Channel Selection
Select the Auto Channel Select check box if you want the SCALANCE W 788 to
search for a free channel itself. If you want to set a specific channel, do not select
Auto Channel Select and you can then select a suitable channel in the Radio
Channel list box.
Syntax of the Command Line Interface
CLI\INTERFACES\WLAN1>
or for the second wireless adapter (if it exists)
CLI\INTERFACES\WLAN2>
Command Description Comment
port <E|D>
Enable / disable wireless port.
ssid <network name>
Assignment of a network name.
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
78 C79000-G8976-C184-01