User's Manual

Configuration Using Web Based Management and the Command Line Interface
mode <A|B|G>
Select the transmission standard
802.11a / 802.11b / 802.11g.
In the version for
USA/Canada, the
802.11a and 802.11g
standards cannot be se-
lected for the second
wireless adapter.
autoch <E|D>
Enable / disable the channel selec-
tion by the SCALANCE W 788.
channel <1 ... 11>
Specifies the wireless channel.
adopt <MAC address>
Assigns a MAC address to the
Ethernet port of the
SCALANCE W 744-1pro. As the
parameter, specify the MAC address
of the network adapter by which the
computer is connected to the
SCALANCE W 744-1pro.
RCM only
autoadopt <E|D>
Enables / disables the automatic
adoption of the MAC address of the
computer by the SCALANCE W 744-
1pro.
RCM only
adhoc <E|D>
Enables / disables the ad hoc net-
work mode for a SCALANCE W 744-
1pro. If this is enabled for two
SCALANCE W 744-1pro devices,
these devices can communicate with
each other without an additional ac-
cess point.
RCM only
anyssid <E|D>
Enables / disables the any SSID. RCM only
bkscan <E|D>
Enables / disables the scan for
SCALANCE W 788 devices.
RCM only
CLI\INTERFACES\WLAN1\SSID>
Command Description Comment
add <network name>
Specifies the network name for a
SCALANCE W 744-1pro.
RCM only
6.3.3 Advanced Submenu
Configuring Transmission Characteristics
On this page, you can specify details of the transmission characteristics. You only
need to adapt the parameters on this page if the SCALANCE W 788 cannot be
used as it is intended with the default settings.
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
C79000-G8976-C184-01
79