User's Manual

Configuration Using Web Based Management and the Command Line Interface
Syntax of the Command Line Interface
CLI\INTERFACES\WLAN1\802.11G>
or for the second wireless adapter (if it exists)
CLI\INTERFACES\WLAN2\802.11G >
Command Description Comment
ctsmode <0|1|2>
Specifies whether CTS is used for
802.11g management information:
0 Do not use CTS.
1 Always use CTS.
2 Use CTS depending on the
packet size.
ctsrate <0|1|2|3>
Specifies the data rate for 802.11g
CTS frames:
0 1 Mbps
1 2 Mbps
2 5.5 Mbps
3 11 Mbps
ctstype <0|1>
Specifies the method for avoiding
collisions for 802.11g management
information:
0 CTS only
1 RTS/CTS
sslot <E|D>
Enables / disables short slot times
between data packets.
basic<0|1|2|3|4>
Transmission of management infor-
mation of the SCALANCE W 788 is
compatible with the selected stan-
dard:
0 802.11 (max. 2 Mbps)
1 802.11b (max. 11 Mbps)
2 802.11g (max. 54 Mbps)
3 OFDM
beacon <0|1|2|3|4|5|6>
Specifies the maximum data rate for
beacons in the 802.11g mode:
0 max. 1 Mbps
1 max. 2 Mbps
2 max. 5.5 Mbps
3 max. 11 Mbps
4 max. 6 Mbps
5 max. 12 Mbps
6 max. 24 Mbps
only11g <E|D>
Enables / disables the OFDM modu-
lation scheme.
overlap <E|D>
Enables / disables beacons from the
SCALANCE W 788 on all channels.
draft5 <E|D>
Enables / disables Draft 5-
compatibility of the
SCALANCE W 788.
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
C79000-G8976-C184-01
83