User's Manual

Configuration Using Web Based Management and the Command Line Interface
● WEP
Encryption with static WEP keys (according to the RC4 algorithm) that you
specify in the Keys menu.
● AES (Advanced Encryption Standard)
Encryption according to the
Rijndael algorithm.
● TKIP
Use of dynamic keys. Starting from an initialization key, a new key is generated
for each data packet.
Additional Entries for WPA-PSK
To use the WPA-PSK scheme, you must enter a string in the Pass Phrase box that
is used by the SCALANCE W 788 to initialize dynamic key generation. In the
Group Key Update Interval box, you specify the time after which a new key is gen-
erated.
Syntax of the Command Line Interface
CLI\SECURITY\BASIC\WLAN1>
or for the second wireless adapter (if it exists)
CLI\SECURITY\BASIC\WLAN2>
Command Description Comment
mgmteth <E|D>
It is only possible to configure the
SCALANCE W 788 over the wired
Ethernet interface (E) or over all in-
terfaces (D).
authent <0|1|2|3|4>
Specifies the authentication type.
For the parameter n, enter a number
between 0 and 4 for the type authen-
tication:
0 Open System
1 Shared Key
2 WPA (RADIUS)
3 WPA-PSK
4 802.1x (RADUIS)
encrypt <E|D>
Encryption enabled / disabled.
cipher <AUTO|WEP|AES|
TKIP>
Specifies the encryption scheme.
keysrc <0|1>
Select the key source.
Enter 0 as the parameter if the key is
managed by the server. Enter 1 if a
key exists both locally and on the
server.
defkey <0|1|2|3>
Selects the default WEP key.
wpaphrase <WPA password>
Enter the WPA password.
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
C79000-G8976-C184-01
87