User's Manual

Configuration Using Web Based Management and the Command Line Interface
Command Description Comment
grkint <interval>
Specifies the "Group Key Update
Intervals".
supssid <E|D>
Enable / disable Close Wireless Sys-
tem functionality.
intracell <E|D>
Enable / disable Enable Intracell
mode functionality.
username <name>
Specifies the user name. PEAP only.
password <password>
Specifies the password PEAP only.
chkserver <E|D>
Enables / disables authentication of
the server.
cltcert <certificate>
Specifies the name of the certificate
for the client.
srvcert <certificate>
Specifies the name of the certificate
for the server.
6.4.2 Keys Menu Command
Specifying the WEP Key
If you are selected Shared Key for the authentication, the SCALANCE W 788 also
uses the keys stored on the device for data encryption. To allow you to make a se-
lection in the Default WEP Key box, you must first specify four master keys in the
Keys menu.
6.4.3 ACL Menu Command
Device-Specific Access Permissions
ACL is an assignment of MAC addresses and access permissions.
If ACL is enabled, prior to data transfer, the SCALANCE W 788 checks whether
the necessary permissions for the communication partner (identified by the MAC
address) are entered in the ACL table
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
88 C79000-G8976-C184-01