User's Manual

Configuration Using Web Based Management and the Command Line Interface
Syntax of the Command Line Interface
CLI\SECURITY\ACL\WLAN1>
Command Description Comment
aclmode <E|D>
Enable / disable access control list.
6.4.4 RADIUS Server Menu Command
Authentication over an External Server
The concept of RADIUS is based on an external authentication server. A client can
only access the network after the SCALANCE W 788 has verified the logon data of
the client with the authentication server. Both the client and the authentication
server must support the EAP protocol (Extensive Authentification Protocol).
Syntax of the Command Line Interface
CLI\SECURITY\RADIUS>
Command Description Comment
server <IP address>
Specifies the IP address of the pri-
mary RADIUS server.
server B <IP address>
Specifies the IP address of the
backup RADIUS server.
port <port>
Specifies the port of the primary
RADIUS server.
port B <port>
Specifies the port of the backup
RADIUS server.
secret <password>
Specifies the password for the pri-
mary RADIUS server.
secret B <password>
Specifies the password for the
backup RADIUS server.
maxreq <max. number>
Maximum number of queries to the
RADIUS server.
maxreq B <max. number>
Maximum number of queries to the
RADIUS server. (backup server)
authprd <time in s >
Period for repeating authentication. The default is 3600 s.
Operating Instructions SCALANCE W 788-1pro / SCALANCE W 788-2pro
C79000-G8976-C184-01
89