Washer dryer WD14H421GB siemens-home.com/welcome HQ ,QVWUXFWLRQ 0DQXDO DQG ,QVWDOODWLRQ ,QVWUXFWLRQV ens-home.
Your new washer dryer Note/tip You have chosen a Siemens washer dryer. Information about the optimum use of the appliance/any other useful information. Please take a few minutes to read and become familiar with the advantages of your washer dryer. To meet the high quality demands required by Siemens, every washer dryer that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
en Contents enI structionManual ndInstal tionI structions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .5 Electrical safety. . . . . . . . . . . . . . . . . . 5 Risk of injury . . . . . . . . . . . . . . . . . . . . 5 Safety for children. . . . . . . . . . . . . . . . 5 7 Protection of the environment . .6 Packaging/old appliance . . . . . . . . . . 6 Hints and tips . . . . . . . . . . . . . . . . . . . 6 Y The main points in brief . . . . . . .
en Intended use 4 Customer service . . . . . . . . . . . 35 J Technical specifications . . . . . 35 [ Consumption values . . . . . . . . 36 5 Installation and connection . . . 37 Standard accessories . . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . . Secure installation . . . . . . . . . . . . . Installation area . . . . . . . . . . . . . . . Installing the appliance on a base or on a wooden joist ceiling. . . . . . Installing the appliance under/ between kitchen units . . . . . . . .
Safety instructions ( Safety instructions Electrical safety snoitcursniyteSfa : Warning Risk of scalding! ■ : Warning Danger of death! Danger of death if live parts are touched. ■ When disconnecting the mains plug, always pull the plug itself and not the cable, otherwise the cable could be damaged. ■ Never touch or hold the mains plug with wet hands. Risk of injury : Warning Risk of injury! ■ ■ ■ ■ If the washer dryer is lifted using projecting parts (e.g.
en Protection of the environment : Warning Risk of choking! When playing, children may become entangled in the packaging/film and packaging parts or pull them over their heads and suffocate. Keep packaging, plastic film and packaging parts out of the reach of children. : Warning Risk of poisoning! Detergents and care products may be poisonous if consumed. Keep detergents and care products out of the reach of children.
The main points in brief en Y The main points in brief feirbnstiopnmaeTh 1 @ Plug into the mains. Turn the tap on. @ Open the washer dryer door. -------- 2 @ Select the washing/ drying programme @ If required, change the programme default settings and/or select additional functions. -------- 3 @ Max. load in display panel. @ Sort the laundry. @ Load the laundry. @ FODFN Open the detergent drawer. -------- 4 @ End of the programme. Close the washer dryer door.
en Getting to know your appliance * Getting to know your appliance Washer dryer ecnailpruoywnktgniGte # 6 7 FODFN ( 0 8 8 Hot air outlet Operating/display panel Door with handle 9S Open the door 9T Close the door @ Service flap and cool air inlet
Getting to know your appliance en Control panel Change the default settings for the selected programme and select additional functions: ( Select a programme. Can be rotated in either direction. To switch off the washer dryer, set the programme selector to $ Off. 0 Select buttons Temp. (Temperature), Spin rpm (Spin speed), Finish in and Dry for changing default settings. ~ Page 24 + # 8 Select buttons Option and Select for additional functions. ~ Page 26 @ Start programme.
en Getting to know your appliance Display panel Displays for the programme # + (: Temperature for washing programme Ž (cold) – 90° Temperature in °C 0: Spin speed for washing programme $ –1400 Spin speed in revolutions per minute; $ (Rinse stop = without final drain/spin cycle, laundry remains in the water after the last rinse cycle) See details ~ Page 26 8: Additional functions s Prewash x Washing q Rinsing 0 Draining/Spinning Ù Drying | lights up Water pressure too low.
Getting to know your appliance Drying en w flashes The childproof lock is actived, and if the programme selector has been adjusted or the buttons have been pressed è On if drying programme is selected 1:50* Programme duration after programme selection in h:min (hours:minutes) 1 – 24 h Finish in time in h (h=hour) 7.0 kg* Max.
en Laundry O Z Laundry Preparing laundry for washing W Sorting laundry according to: Ž yrdnuaL Sort your laundry according to the care instructions and specifications of the manufacturer on the care labels: ■ Type of fabric/fibre ■ Colour Note: Laundry can discolour or not be cleaned correctly. Wash white and coloured items separately. Wash new bright fabrics separately the first time you wash them. ■ Soiling – light Do not prewash; if necessary select the ( (speedPerfect) additional function.
Laundry ■ ■ ■ ■ ■ ■ Trousers, knitwear and knitted textiles, e.g. jersey garments, T-shirts or sweatshirts, should be turned inside out. Ensure that underwired bras are machine-washable. Wash delicates in a net or bag (tights, underwired bras, etc). Close zips, button up covers. Brush sand out of pockets and collars. Remove curtain fittings or include in the net/bag. Preparing laundry for drying ■ ■ ■ ■ en Before drying, spin at the optimum speed.
en Operating the appliance 1 Operating the appliance Preparing the washer dryer ecnailpehtgniaOrep The washer dryer was tested before delivery. To remove residual water from the test procedure, the first wash cycle should be run without laundry using the Fluff clean programme. Before washing/drying for the first time ~ Page 43 Selecting the programme/ Switching on the appliance Note: If you have activated the childproof lock, you must deactivate it before you can set a programme.
Operating the appliance ■ The buttons are sensitive, they only need to be touched gently. If the button Temp.(Temperature), Spin rpm(Spin speed), Finish in is held down, the setting options are automatically scrolled through. Changing default settings for a washing programme, e. g. washing temperature: Touch the Temp.(Temperature) button to set desired washing temperature.
en ■ Operating the appliance Observe the indicated maximum load. Overfilling adversely affects the washing result and promotes creasing. 1. Unfold presorted laundry items and place in the drum. 2. Ensure that no laundry items are trapped between the door and rubber seal. 3. Close the door. Note: The indicator light on the Start/ Reload button flashes and the default settings for the programme appear continuously on the display panel. Changes may be made to the default settings.
Operating the appliance ■ If an individual drying programme is selected, please do not add detergent and/or care product in the appliance. Measuring aid* for liquid detergent *depending on the model Position the measuring aid for measuring the correct amount of liquid detergent: 1. Pull out the detergent drawer. Press down the insert and fully remove the drawer. 2. Slide the measuring aid forwards, fold it down and click it into place. 3. Reinsert the drawer.
en Operating the appliance Reloading the laundry When the programme has started, the laundry can be reloaded or taken out as required. Select Start/Reload. The washer dryer checks whether reloading is possible. Notes ■ If there is a high water level, high temperature or if the drum is rotating, the door remains locked for safety reasons and reloading is not possible. If the following is indicated on the display panel: A:02 + PAUS ~ Reloading is not possible.
Operating the appliance en After washing/drying 1. Open the door and remove the laundry. 2. Turn the programme selector to $ Off. The appliance is switched off. 3. Turn off the tap. Not required for Aqua-Stop models. ~ Page 37 Notes Do not leave any items of laundry in the drum. In the next wash they may shrink or discolour another item. ■ Remove any foreign objects from the drum and the rubber seal – risk of rust.
en Overview of programmes / Overview of programmes Programme on the programme selector margsoepfweivOr Programme/Type of washing Name of the programme Brief explanation of the programme and which textiles it is suitable for. Options/Information maximum load according to EN50229 maximum load for washing/ maximum load for drying selectable temperature in °C selectable spin speeds in rpm possible additional functions for washing possible settings for drying Cottons max.
Overview of programmes Programme/Type of washing h Wool Hand and machine-washable fabrics made of wool or wool blend; particularly gentle wash programme to prevent shrinkage of laundry, with longer programme breaks (soaking garments in the detergent solution). Note: ■ Wool is of animal origin, e.g.: Angora, alpaca, llama, sheep. ■ Use a detergent suitable for machine washable wool. Rinse Washable textiles, Extra rinse with spin. en Options/Information max. 2 kg Ž (cold) – 40 °C $ – 800 rpm – – max.
en Overview of programmes Programme/Type of washing Textile Guard Weatherproof and outdoor clothing with membrane coating and water-resistant textiles. Options/Information max. 1 kg/1 kg Ž (cold) – 40 °C 400 – 800 rpm (, ¦, Ã, l Aut 1 Fluff Clean – Special program for drum hygiene or fluff removal. Ž (cold) – 40 – 90 °C 90 °C = antibacterial program, do not use detergent. 400 – 1400 rpm 40 °C = antibacterial program; special drum cleaning detergent can – be used.
Overview of programmes en Drying table Cottons/coloureds (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers, kitchen towels) Dry weight in kg 0,5 _1,0 1,0 _ 2,0 2,0 _ 3,0 3,0 _ 4,0 Estimated drying time in min Cupboard dry Aut1 < 60 60 _ 85 Extra dry < 65 65 _ 100 100 _140 140 _170 Aut2 Recommended programme 85 _ 120 120 _ 160 _ 0,5 _ 1,0 _ 2,0 _ 2,5 Adjustable drying time in min 30 Intensive Dry (Auto) 60 90 120 Intensive Dry (Time) Quilt/terry cloth
en Changing programme default settings Starching Note: The laundry should not be treated with fabric softener. Liquid starch can be used in all wash programmes. Pour starch into the dispenser M according to manufacturer’s specifications (if required, clean beforehand). 0 Changing programme default settings You can change the default settings for selected programmes. The settings can be changed even while the selected programme is running. The effects depend on the progress of the programme.
Changing programme default settings drying or timed drying with a required drying duration is available. Notes ■ Programme selection in Intensive Dry or Gentle Dry position to select an individual drying programme. Overview of programmes ~ Page 20 The standard drying mode is Aut1. In this mode the drying time is automatically set according to the amount of laundry to be dried. The result is cupboard-dry laundry.
en Selecting additional functions \ Selecting additional functions Select the desired additional functions Option button, keep on touching the button until the indicator light of your desired additional functions flashes and then activate the chosen function with Select button, the è indicator light comes on. The additional function is selected or touch the Select button again to deactive this additional function. snoitcuf lanoitdagnitceSl z (Water Plus) Increased water level and extended wash time.
Setting the signal en M Setting the signal langisehtgni Ste 1. Activate setting mode for the signal volume Turn to $ Off. Turn one position Press and hold Temp. button + clockwise. turn one position clockwise. Release the button, figure apperas in the display. 2.a Set the volume for the button signals (depending on model) Touch the Finish in button until the required volume is reached Go to step 2.b. or Set to $ Off, swhich exits setting mode for the signal volume. 2.
en Cleaning and maintenance 2 Cleaning and maintenance : Warning Risk of electric shock! Danger of death if live parts are touched. Switch off the appliance and disconnect at the mains plug. follow the instructions of the descaling agent manufacturer. Suitable descalers can be purchased on our website or from customer service. ~ Page 35 ecnatmidgnaeCl : Warning Risk of poisoning! Solvent-based cleaning agents, e.g. petroleum ether, in the washer dryer may cause toxic vapours.
Cleaning and maintenance 3. Open the service flap. 4. Take the drainage hose out of the holder. 5. Remove the cover flap, draining the washing water into a suitable container. Press on the cover flap and insert the drainage hose into the holder. Note: Residual water may run out. 6. Carefully unscrew the pump cover. Clean the interior, pump cover thread and pump housing (the fan impeller in the detergent-solution pump must be able to rotate). 7. Reinsert and screw on the pump cover.
en Faults and what to do about them Take out the filter with pliers and clean it. 3 Faults and what to do about them Emergency release, e.g. if a power failure occurs meht uobadt wahdnstluFa 7. Connect the hose and check for leaks. Air filter blocked 1. Turn the programme selector to $ Off. Pull out the mains plug. 2. Open and remove the service flap. 3. Take out the air filter. The programme continues running when the power supply is restored.
Faults and what to do about them en Information on the display panel Display Cause/Remedy A:01 Close the door immediately because of the rising water level. If an interruption occurs, A:01 and OPEn are displayed alternately. A:02 The door is locked for safety reasons (water level and/or temperature too high). ■ Washing programme: In pause mode A:02 and PAUS are displayed alternately. If you have to open the door, wait until the temperature has dropped slightly or pump out the water (select e.g.
en Faults and what to do about them Faults and what to do about them Faults Cause/Remedy Water is running out. ■ ■ Water not flowing in. Detergent not dispensed. ■ ■ ■ ■ The washing machine door cannot be opened. ■ ■ ■ ■ Programme does not start. Detergent solution is not drained. ■ ■ ■ ■ ■ Water not visible in the drum. Spin result not satisfactory. Laundry wet/too damp. Spin cycle activated several times. Residual water in the dispenser for care product.
Faults and what to do about them Faults Display panel/indicator lights do not function while the appliance is running. The programme duration changes during the wash cycle. Detergent residue on the washing. en Cause/Remedy ■ ■ ■ ■ ■ ■ ■ Power failure? Fuse tripped? Switch on/replace fuse. If the fault occurs repeatedly, call customer service. ~ Page 35 Not a fault – unbalanced load detection system adjusts imbalance. Not a fault – foam detection function active. Additional rinse cycle.
en Faults and what to do about them Faults The drying result is not satisfactory (laundry is not dry enough). Cause/Remedy ■ ■ ■ ■ ■ ■ When the door is opened, you will notice that a small amount of water drips onto the dried laundry. ■ ■ Excessively high ambient temperature (above 30 °C) or inadequate ventilation in the room in which the washer dryer is situated. Ensure adequate ventilation to allow surplus heat to escape. The laundry has not been spun well enough before drying.
Customer service 4 Customer service If you cannot correct the fault yourself, see section, Faults and what to do about them ~ Page 32, please contact our customer service. We will always find a suitable solution and aim to avoid unnecessary visits by technicians. Please give customer service the product number (E-Nr.) and the production number (FD) of the appliance.
en Consumption values [ Consumption values seulavnoimuCstp Programme Option Load (kg) Energy Water Programme consumption *** Consumption *** duration *** (kWh) (liter) (hours) Cottons 20 °C * 7,0 0,23 73 2¾ Cottons 40 °C * 7,0 1,02 73 2¾ Cottons 60 °C 7,0 1,10 73 2¾ Cottons 90 °C 7,0 2,05 83 2¾ 3,5 0,56 60 1¾ Mixed Fabrics 40 °C 3,5 0,45 53 1 Delicates/Silk 30 °C 2,0 0,15 29 ¾ Wool 30 °C 2,0 0,18 40 ¾ Intensive Dry 4,0 2,47 3,0 2½ Gentle Dry 2,5 1,46 3,0
Installation and connection Note: A hose clip Ø 24–40 mm (specialist store) is also required for connection to a siphon. Connecting the water ~ Page 40 5 Installation and connection Standard accessories noitcednaoitlasnI Note: Check the washer dryer for damage sustained in transit. Do not switch on a damaged washer dryer. If you have any complaints, contact the dealer where you purchased the appliance or our customer service.
en Installation and connection Installation area Note: Stability is important to prevent the washer dryer from wandering! ■ The installation area must be firm and level. ■ Soft floors and floor coverings are not suitable. ■ To ensure good drying results, ensure that the room is well ventilated. : Warning Risk of scalding! During the drying phase, warm air is emitted at a temperature of up to 60 °C.
Installation and connection en Removing the transportation protection devices Caution! Damage to the appliance ■ Before using the washer dryer for the first time, it is essential to remove all 4 transportation protection devices. Keep the transportation protection devices. The washer dryer is secured for transportation with transportation protection devices. Transportation protection devices which have not been removed may damage the drum, for example, while the washer dryer is running.
en Installation and connection Note: If the hose holders are used, the possible hose lengths are reduced! Water supply Available from dealer/customer service: ■ Extension for Aqua-Stop or cold water inlet hose (approx. 2.50 m). Order no. WMZ2380, WZ10130, CZ11350, Z7070X0. ■ Longer supply hose (approx. 2.20 m), for standard model. Notes ■ Do not kink, crush, alter or cut through the water supply hose (otherwise, its strength can no longer be guaranteed). ■ Only tighten the screw connections by hand.
Installation and connection 2. Carefully turn on the tap and check that the connection points are not leaking. en and damage the washer dryer and/or textiles. Ensure that: ■ the sealing plug does not block the outflow of the washbasin. ■ the water drains quickly enough. ■ the end of the drainage hose is not immersed in the drained water. Installing the drainage hose: Note: The screw connection is under water pipe pressure. Water drainage Notes ■ Do not kink or overextend the water drainage hose.
en Installation and connection Alignment Electrical connection 1. Loosen the lock nut in a clockwise direction with a wrench. 2. Check the alignment of the washer dryer with a spirit level and, if required, correct. Adjust the height by rotating the appliance foot. Note: All four appliance feet must be firmly on the floor. The washer dryer must not wobble! 3. Tighten the lock nut against the housing. Grip the foot and do not adjust the height.
Installation and connection Before washing/drying for the first time The washer dryer was inspected thoroughly before leaving the factory. To remove any residual test water, run the Fluff Clean 40°C programme the first time without laundry. Note: The washer dryer must have been installed and connected properly. Installation and connection ~ Page 37 ■ Never switch on a damaged machine. Inform your customer service. ~ Page 35 ■ Insert mains plug. Turn the tap on. Switch on the appliance.
Repair order and advice in the event of faults GB 0344 892 8999 (Calls charged at local or mobile rate.) IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.