User's Manual

Automation and Drives - SCE
T I A Training Document Page 116 of 129 Module
F6
Issued: 02/2008 Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
10 CONFIGURING RECIPES
Recipes can be set up for the different mixing ratios of the color mixing plant. By using recipes, it is
possible to transfer several variables simultaneously to the controller. Recipes can be stored in the
controller or in the panel.
10.1 Adding Recipes
In the project window, double click on “Add Recipe“.
As recipe name and as display name, enter “Color Mixtures“ (Farbmischungen).
Generate three recipe elements with the names “RED, GREEN, BLUE“, and connect them with the
variables for the setpoint of Tank1 to Tank3.
SETPOINT_T1